Specifications

7-4
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 7 Performance Monitoring
Monitoring DS1 Performance
Alarm State A bitmap of the DS1 line alarms. Zero means no alarm.
• bit 0: Receiving RAI
• bit 1: Transmitting RAI
• bit 2: Receiving AIS
• bit 3: Transmitting AIS
• bit 4: Receiving OOF
• bit 5: Receiving LOS
• bit 6: Near end local loopback in effect
• bit 7: Near end remote loopback in effect
• bit 8: Near end remote payload loopback
• bit 13: BERT in effect
• bit 14: Far end remote loopback in effect
• bit 15: Detected near end remote loopback in effect
Performance Alarm State The DS1 line performance alarms, displayed as a row of indicators.
• Indicator 0: LCV 15 minute threshold exceeded
• Indicator 1: LCV 24 hour threshold exceeded
• Indicator 2: LES 15 minute threshold exceeded
• Indicator 3: LES 24 hour threshold exceeded
• Indicator 4: LSES 15 minute threshold exceeded
• Indicator 5: LSES 24 hour threshold exceeded
• Indicator 6: PCV 15 minute threshold exceeded
• Indicator 7: PCV 24 hour threshold exceeded
• Indicator 8: PES 15 minute threshold exceeded
• Indicator 9: PES 24 hour threshold exceeded
• Indicator 10: PSES 15 minute threshold exceeded
• Indicator 11: PSES 24 hour threshold exceeded
• Indicator 12: SEFS 15 minute threshold exceeded
• Indicator 13: SEFS 24 hour threshold exceeded
• Indicator 14: AISS 15 minute threshold exceeded
• Indicator 15: AISS 24 hour threshold exceeded
• Indicator 16: UAS 15 minute threshold exceeded
• Indicator 17: UAS 24 hour threshold exceeded
• Indicator 18: BES 15 minute threshold exceeded
• Indicator 19: BES 24 hour threshold exceeded
• Indicator 20: PCSS 15 minute threshold exceeded
• Indicator 21: PCSS 24 hour threshold exceeded
Displayed Information Description