Specifications

6-33
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 6 Alarm Surveillance
Working With Traps
DS3 Traps
The following table summarizes the alarm conditions and corresponding trap numbers for DS3 alarms:
DS1 line alarm cleared Info 1305
DS1 line performance major alarm Major 1306
DS1 line performance minor alarm Minor 1307
DS1 line performance alarm clear Info 1308
DS1 line update threshold Info 1309
DS1 line payload loopback up Info 1310
DS1 line - line loopback up Info 1311
DS1 line other loopback up Info 1312
DS1 line loopback down Info 1313
DS1 line BERT on Info 1314
DS1 line BERT off Info 1315
E1 line performance major alarm Major 1316
E1 line performance minor alarm Minor 1317
E1 line performance alarm cleared Info 1318
E1 line threshold updated Major 1319
DS1 trap update sent
1
Info 1320
1. Trap sends information for all lines, not a single event.
Table 6-13 DS1 Traps (continued)
Event Severity Trap Number
Ta b l e 6 - 1 4 D S 3 Tr a p s
Event Severity Trap Number
DS3 line added Info 1400
DS3 line deleted Info 1401
DS3 line modified Info 1402
DS3 line major alarm Major 1403
DS3 line minor alarm Minor 1404
DS3 line alarm cleared Info 1405
DS3 line performance major alarm Major 1406
DS3 line performance minor alarm Minor 1407
DS3 line performance alarm clear Info 1408
DS3 line threshold update Info 1409
DS3 line payload loopback up Info 1410
DS3 line - line loopback up Info 1411