Specifications

xvii
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
About This Guide
This chapter describes the procedures for configuring, operating, and troubleshooting the MGX 8260
Media Gateway from the command line interface.
Document Overview
This guide contains instructions for configuring, operating, and troubleshooting the MGX 8260 Media
Gateway.
Chapter 1, “Overview of the MGX 8260 Media Gateway”
Chapter 2, “System Management”
Chapter 3, “Card Management”
Chapter 4, “Service Management”
Chapter 5, “Call Control”
Chapter 6, “Alarm Surveillance”
Chapter 7, “Performance Monitoring”
Chapter 8, “Troubleshooting”
Chapter 9, “Command Reference”
Who Should Use This Guide
This guide is used by the following network experts:
• Component installers, who have experience installing equipment and cables for telecommunication
and data communication products.
• Network operators/administrators, who have experience configuring telecommunication and data
communication networks, protocols, and equipment.
• Network designers, who plan and specify components for telecommunication and data
communication networks, protocols, and equipment.