Specifications

6-20
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 6 Alarm Surveillance
Surveillance Tasks for Alarms
Figure 6-1 EMM Alarm Scale
Specifying Sensors
In most cases, the MGX 8260 Media Gateway monitors environmental conditions with multiple sensors
located at different physical locations. When listing environmental conditions, specify the sensor ID
that corresponds to the sensor you want to view. The following tables list sensors by type and id.
M
ajor alarm Minor alarm
Major low
31932
Minor low
Normal
Normal
Normal Minor alarm Major alarm
Minor hi
Major hi
Table 6-5 SCC Sensors
SId emmSensorType = temp(1) emmSensorType = voltage(2)
1 Main board bottom 5 V
2 Main board top 3.3 V
3 Main board front 2.5 V
4 CSM board
5 BIM board bottom
6BIM board top
7 Main board middle
Table 6-6 DMC Sensors
SId emmSensorType = temp(1) emmSensorType = voltage(2)
1 Main board top 5 V
2 Main board bottom 3.3 V
Table 6-7 NSC Sensors
SId emmSensorType = temp(1) emmSensorType = voltage(2)
1 Main board top 5 V
2 Main board bottom 3.3 V
3 Main board middle 2.5 V
4 MSM1 board bottom 1.8 V
5 MSM1 board top
6 MSM2 board bottom
7 MSM2 board top
8 Main board front