Specifications

6-6
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 6 Alarm Surveillance
Surveillance Tasks for Alarms
Viewing DS1 Alarm Thresholds
To view DS1 alarm thresholds, enter the lsds1alm command, specifying the slot and line number,
delimited by a period, of the line. The system displays the alarm threshold list:
=======================================================================
DS1 Line Alarm Thresholds (lsds1alm)
=======================================================================
DS1 Line : 16.1
Red Severity : major
RAI Severity : minor
Perf Alarm Severity : minor
LCV 15 Min Threshold: 14
LCV 24 Hr Threshold: 134
LES 15 Min Threshold: 12
LES 24 Hr Threshold: 121
LSES 15 Min Threshold: 10
LSES 24 Hr Threshold: 100
PCV 15 Min Threshold: 35
PCV 24 Hr Threshold: 50
PES 15 Min Threshold: 35
PES 24 Hr Threshold: 50
PSES 15 Min Threshold: 35
PSES 24 Hr Threshold: 50
SEFS 15 Min Threshold: 2
SEFS 24 Hr Threshold: 17
PSAS 15 Min Threshold: 2
PSAS 24 Hr Threshold: 17
UAS 15 Min Threshold: 10
UAS 24 Hr Threshold: 10
BES 15 Min Threshold: 35
BES 24 Hr Threshold: 50
PCSS 15 Min Threshold: 35
PCSS 24 Hr Threshold: 50
Refer to the following table for a list of threshold counters and default values:
Displayed Information Description
DS1 Line The slot and line number of the DS1 line
Red Severity Severity of near end Loss Of Frame
RAI Severity Severity of Remote Alarm Indication
Performance Alarm Severity Severity of any performance alarms
Threshold counters (Table 6-1) The thresholds for line errors that invoke a performance
alarm.
Table 6-1 DS1 Performance Alarm Thresholds
Threshold Description Default
LCV 15 15 minute line code violations 14
LCV 24 24 hour line code violations 134
LES 15 15 minute line errored seconds 12
LES 24 24 hour line errored seconds 121
LSES 15 15 minute severely errored seconds 10