Specifications

5-34
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for IPDC
The following information is displayed:
=========================================================================
IPDC Soft Switch Configuration (lsipdc)
=========================================================================
Primary Soft Switch IP Address : 10.1.1.2
Primary Soft Switch TCP port : 5000
Secondary Soft Switch IP Address : 10.1.1.3
Secondary Soft Switch TCP port : 5000
Gateway IP Address : 10.1.1.1
Gateway TCP port : 5000
System Id : Cisco_MGX-8260
System Type : TDM_XCONN
Pseudo IP Address : 0.0.0.0
Maximum Modules : 16
Bay Number : 00000001
Numbering Format : zeroBased
Current Soft Switch : primary
Operation Status (Current Soft Switch) : down
Previous Operation Status (CSS) : down
Date and time of last opst change : 07/24/2000 08:31:05
Primary Soft Switch Health Check : enabled
Secondary Soft Switch Health Check : enabled
Health Check Response Timer (msec) : 1000
Secondary Soft Switch Admin Status : down
Graceful Down Timer (sec) : 0
Displayed Information Description
Primary Soft Switch IP Address The IP address of the primary Soft Switch
Primary Soft Switch TCP port The port number of the primary Soft Switch
Secondary Soft Switch IP Address The IP address of the secondary Soft Switch
Secondary Soft Switch TCP port The port number of the secondary Soft Switch
Gateway IP Address The IP address of the gateway for IPDC traffic
Gateway TCP port The port number of the gateway for IPDC traffic
System Id The user-defined identifier for this system
System Type The user-defined identifier for this system type
Pseudo IP Address A single IP address that represents up to four broadband ports
Maximum Modules The maximum number of IPDC modules
Bay Number The number of this bay for IPDC purposes
Numbering Format Specifies zero-based or one-based numbering for communicating with the Soft
Switch
Current Soft Switch The active Soft Switch
Operation Status (Current Soft Switch) The operational state of the active Soft Switch
Previous Operation Status (CSS) The previous operational state of the active Soft Switch
Date and time of last opst change A date stamp for the last operational status change
Primary Soft Switch Health Check The enable state of the primary Soft Switch health check
Secondary Soft Switch Health Check The enable state of the secondary Soft Switch health check
Health Check Response Timer (msec) The current setting for the health check response timer