Specifications

5-33
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for IPDC
Configuring IPDC Timers and Counters
IPDC timers and counters control how the link behaves under abnormal or fault conditions. You can use
the default settings, or provide a custom set.
To configure IPDC core settings, follow these steps:
Step 1 Set the IPDC link timers and retry counters using the chipdctimer command.
Step 2 Verify the changes using the lsipdctimer command.
Configuring COT Settings
To configure IPDC COT settings, follow these steps:
Step 1 Specify the IPDC COTs using the chipdccot command.
Step 2 Verify the changes using the lsipdccot command.
Activating IPDC and Link Health Check
To activate IPDC links, follow these steps:
Step 1 Enable the primary and secondary Soft Switch using the chipdcssadm command.
Step 2 Enable the primary and secondary health check feature using the chipdcsshlth command.
Step 3 Verify the link status using the lsipdc command.
Viewing IPDC Settings
You can view the following IPDC information:
• IP addresses and connection status
• IPDC status
• Protocol statistics
To view IPDC IP settings, use the lsipdc command.