Specifications

5-29
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
LAPD Type The LAPD interface type:
• test—Test
• ccitt—CCITT
• att5EssBRA—AT&T 5ESS BRA
• att5EssPRA—AT&T 5ESS PRA
• att4Ess—AT&T 4ESS
• ntDMS100BRA—NT dms100 BRA ntDMS100PRA—NT dms100
PRA
• vn2or3—VN 2 or VN 3
• insNet—INS Net
• tr6MPC—tr6 MPC
• tr6PBX—tr6 PBX
• ausb—Austel Basic
• ausp—Austel Primary
• nISDN1—National ISDN-1
• etsi—ETSI
• bc303TMC—Bellcore tr303 tmc
• bc303CSC—Bellcore tr303 csc
• ntDMS250—NT dms250
• bellcore—Bellcore
Maximum Outstanding
Frames
The maximum number of sequentially numbered I-frames that may be
outstanding. Values: 1 to 255
Timer Queue Upper
Threshold
The upper threshold for I-frame queue. When the I-frame queue size
exceeds this threshold, the congestion timer is started and flow-control is
turned on. Values: 1 to 32767
Timer Queue Lower
Threshold
The lower threshold for I-frame queue. When the I-frame queue size falls
below this threshold, the congestion timer is stopped and flow-control is
turned off. Values: 1 to 32767
Connection Timer The connection timer. Values: 1 to 1024
T201 Timer The minimum time between transmissions of the TEI Identity check
message, in seconds. Values: 1 to 1024
T202 Timer The minimum time between retransmission of the TEI Identity request
message, in seconds. Values: 1 to 1024
TEI Check Timer The TEI check timer. The value 1025 means the TEI Check Timer is
disabled. Values: 1 to 1025, where 1025 = disables
N202 Minimum time between transmissions of TEI Identity check messages.
Displayed Information Description