Specifications

5-28
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
T203 Timer The maximum time between retransmission of the TEI identity request
message, in seconds. Values 20 to 60. Default: 10
Modulo Each I-frame is sequentially numbered and may have values 0 through
(N-1) where N is this modulus. Values: 8 or 128. Default: 128
TEI Assignment The Terminal Endpoint Identifier Assignment setting:
1. automatic—TEI is selected by the ASP Layer Management procedure
on the network side.
2. nonAutomatic—TEI is selected by the user. (default)
Maximum DLCs for
this DLSAP
The maximum number of DLCs for this DLSAP. Values: 1 to 16. Default: 1
TEI The starting number for reassigning TEIs. This number is used in
conjunction with the previous two parameters to number TEIs. For
example, if TEI Assignment is nonAutomatic, Maximum DLCs for this
DLSAP is 4, and TEI is 14. When a D Channel is added, 4 TEIs starting at
14 are preconfigured. Values: 0 to 63
MACSAP Identifier The MACSAP profile identifier. Values: 1 to 20
MACSAP Interface The logical interface. Values:
1. user
2. network
Link Setup Arbitration The link setup arbitration scheme. Values:
1. passive
2. active
Displayed Information Description