Specifications

5-22
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
To view all MACSAP statistics, use the lsmacsapstats command. The system displays MACSAP
statistic summaries:
=======================================================================
MACSAP Statistics (lsmacsapstats)
=======================================================================
Slot.Line Received Frames Transmitted Frames Received Bytes
========= =============== ================== ==============
14.1 0 0 0
Managing DLSAP Profiles
DLSAP management consists of adding and deleting profiles. You need at least one profile to add
D Channels.
Adding DLSAP Profiles
To add a DLSAP profile, follow these steps:
Step 1 Specify the settings that define a DLSAP profile using the adddlsp command as described in the
“adddlsp” section on page 9-8. For example, the following command adds DLSAP profile 1 with
default settings:
adddlsp 1
Step 2 Check the profile settings using the lsdlsp command.
Deleting DLSAP Profiles
To delete a DLSAP profile, use the deldlsp command, specifying the identifier of the DLSAP profile
to delete. The following example deletes profile 9.
deldlsp 9
Viewing DLSAP Profiles
To view a DLSAP profile, use the lsdlsp command. The following example lists DLSAP profile 1.
lsdlsp 1