Specifications

5-21
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
The system displays a single MACSAP profile:
=======================================================================
MACSAP Profile (lsmacsapprof)
=======================================================================
MACSAP Identifier : 1
MAC SAP Interface : network
Link Setup Arbitration : passive
LAPD Type : ccitt
Maximum Outstanding Frames : 7
Timer Queue Upper Threshold : 1000
Timer Queue Lower Threshold : 100
Connection Timer : 500
T201 Timer : 1
T202 Timer : 2
TEI Check Timer : 5
N202 : 3
Lowest Range of Automatic TEI: 64
Keep MAC Up All The Time : true
See the description of displayed information in the “Viewing D Channels” section on page 5-26.
To view all MACSAP profiles, use the lsmacsapprofs command. The system displays MACSAP
profile summaries:
=======================================================================
MACSAP Profiles (lsmacsapprofs)
=======================================================================
MACSAP Interface Arbitration LAPD Type N202
========= =========== ============= ============= ==========
1 network passive ccitt 3
See the description of displayed information in Deleting D Channels, page 5-26 for a description of this
information.
Viewing MACSAP Statistics
To view MACSAP statistics for a line, use the lsmacsapstat command. The following example displays
statistics for the MACSAP at slot 7, line 3.
lsmacsapstat 14.1
The system displays MACSAP statistics for the specified line:
=======================================================================
Statistics for a MACSAP (lsmacsapstat)
=======================================================================
MACSAP : 14.1
MACSAP Status : inUse
Received Frames : 0
Transmitted Frames : 0
Received Bytes : 0
Transmitted Bytes : 0
Receive Queued Count : 0
Transmit Queued Count : 0
Receive Dropped Count : 0
Transmit Failed Count : 0