Specifications

5-20
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
The following sections present detailed procedures for each of these steps. For more information on
configuring backhaul, see the “Understanding Sessions” section on page 5-10.
Managing MACSAP Profiles
MACSAP management consists of adding and deleting profiles. You need at least one profile to add
D Channels.
Adding MACSAP Profiles
To add a MACSAP profile, follow these steps:
Step 1 Specify a MACSAP profile using the addmacsapprof command. For example, The following
command adds MACSAP profile 1 with default settings:
addmacsapprof 1
Step 2 Check the profile settings using the lsmacsapprof command.
Deleting MACSAP Profiles
To delete a MACSAP profile, use the delmacsapprof command. The following example deletes
profile 1.
delmacsapprof 1
Use lsmacsapprofs to discover valid profile numbers.
Viewing MACSAP Profiles
To view a MACSAP profile, use the lsmacsapprof command. The following example displays
information about MAC SAP 1.
lsmacsapprof 1