Specifications

5-18
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Managing ISDN D Channels
The system displays the statistics:
=======================================================================
RUDP Transport Statistics (lsrudptxstats)
=======================================================================
Session Identifier : 1
Group Id : 1
Session Set Id : 1
RUDP Connections Opens : 0
RUDP Connection Resets : 978
RUDP Connection Refused : 0
RUDP Connection Failed : 0
RUDP Auto Resets : 0
RUDP Open Failed : 0
RUDP Not Ready : 0
RUDP Connection Not Open : 0
RUDP Transmit Window Full : 0
RUDP Transmit Fail-No resources: 0
RUDP Transmit Fail-Enque failed: 0
Viewing Session Statistics
To view session statistics, use the lssessstats command.
For example, the following command lists statistics for session 1 of group 1 in set 1:
lssessstats 1 1 1
The system displays the statistics:
=======================================================================
Session Statistics (lssessstats)
=======================================================================
Session Identifier : 1
Group Id : 1
Session Set Id : 1
Session Resets : 0
Session Opens : 0
Session CloseWaits : 0
Session Closes : 2144
Session UnExpected Transitions : 0
Session Total Packets Received : 0
Session Receive Errors : 0
Session Total Packets Sent : 0
Session PDU Transmission Fails : 0
Session PDU Blocked : 0
Session NonPDU Fails : 0
Session NonPDU Blocked : 0
To view session statistics since the last reset, use the lssessstatslr command.
Managing ISDN D Channels
The MGX 8260 Media Gateway extends Primary Rate Interface ISDN D Channel signaling to a Media
Gateway Controller via a backhaul channel (see Figure 5-5).