Specifications

5-17
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for Sessions
The system displays the group statistics:
=======================================================================
Session Group Statistics (lsgroupstat)
=======================================================================
Set Identifier : 1
Group Identifier : 1
Session Failures : 0
Session Failover Success : 0
Active Packets Received : 0
Standby Packets Received : 0
Total PDU Post Errors : 0
Viewing RUDP Connection Statistics
To view RUDP connection statistics, use the lsrudpconnstats command.
For example, the following command lists statistics for session 1 of group 1 in set 1:
lsrudpconnstats 1 1 1
The system displays the statistics:
=======================================================================
RUDP statistics for a connection (lsrudpconnstats)
=======================================================================
Set Index : 1
Group Index : 1
Session Index : 1
State of the Connection : synSent
Number of auto resets : 0
Number of auto resets received : 0
Number of packets received in Sequence : 0
Number of packets received out of Sequence: 0
Number of packets sent : 4
Number of packets Received : 0
Number of data packets sent : 0
Number of data packets received : 0
Number of packets discarded : 0
Number of packets retransmitted : 0
Viewing RUDP Transport Statistics
To view RUDP transport statistics, use the lsrudptxstats command.
For example, the following command lists statistics for session 1 of group 1 in set 1:
lsrudptxstats 1 1 1