Specifications

5-14
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for Sessions
To view all groups, use the lsgroups command. The system displays the following group information:
===========================================================================
Session Groups (lsgroups)
===========================================================================
Group Id Set ID Use State Active Session Group State
======== ========== ============= =============== ===============
1 1 none -1 outOfService
See the description of displayed information for the lsgroup command.
Adding a Session Group
MGCP session groups organize sessions into logical groups. A session group contains a collection of
sessions that communicate with the same MGC.
To add a session group, use the addsgrp command.
For example, the following command adds session group 1 to session set 1:
addsgrp 1 1
Deleting a Session Group
To delete a session group, use the delsgrp command.
For example, the following command deletes session group 1 from session set 1:
delsgrp 1 1
Configuring Sessions
You can view and change sessions.
Viewing Session Information
To view session details, use the lssession command. The following example lists information about
session 1 of group 1 in set 1.
lssession 1 1 1
Group Previous Session The previously-active session within this group
Total Sessions The total number of sessions for this group
Total Active Sessions The total number of active sessions for this group
Displayed Information Description