Specifications

5-8
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for MGCP
Viewing MGCP Status Information
To view MGCP status, use the lsmgcp command. The system displays the following MGCP status
information:
=========================================================================
Incoming messages with bad protocol version : 0
Request Timeout : 5000
Request Retries : 12
Operational Status : down
Unrecognized Packets : 0
Maximum waiting delay for restart (millisecs) : 4000
Restart Delay (seconds) : -1
Connectivity Timeout (millisecs) : 60000
Response Timeout (millisecs) : 1000
Capabilities Package Name : Generic; Trunk; Line; RTP
Default COT Transmit Tone The default transmit tone. For transponder COT, when the media gateway controller does
not supply the tones, the default tone the gateway transmits is the default COT transmit
tone. Values:
• co1
• co2
Default Encoding Type The type of voice encoding when not specified by the MGC:
• PCMU—Mu -law encoding
• PCMA—A-law encoding
• G729A
• G726_32K
Displayed Information Description
Displayed Information Description
Incoming messages with bad protocol version The total number of incoming messages delivered to the protocol entity that
were for an unsupported protocol version.
Request Timeout The time in milliseconds before retransmitting an unacknowledged message.
Request Retries The maximum number of retries for a request that times out.
Operational Status The administrative state, as follows:
• up—MGCP is up and running
• bringUpInProgress—MGCP is coming up
• shutDownInProgress—MGCP is shutting down
• down—MGCP is administratively down
Unrecognized Packets The number of unrecognized packets since the MGX 8260 Media Gateway
was reset.
Maximum waiting delay for restart The maximum waiting delay, in milliseconds, before the Media Gateway
interface sends the Restart In Progress message to the Media Gateway
Controller
Restart Delay The delay for a graceful shutdown.