Specifications

5-7
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for MGCP
Viewing Default Call Setup Parameters
To view call control parameters, use the lsmpc command. The system displays the following
information:
=========================================================================
MPC Parameters (lsmpc)
=========================================================================
Default Type of Network : voIp
Packetization Period : 10
Bandwidth : 64
Echo Cancellation : off
Silence Suppression : off
Type of Service : 2
Resource Reservation : bestEffort
Default COT Receive Tone : co2
Default COT Transmit Tone : co1
Default Encoding Type : g729a
Displayed Information Description
Default Type of Network The type of network, voice-over-IP, voice-over-ATM, or local
Packetization Period Packetization Period in milliseconds. Value: fixed at 10
Bandwidth The network bandwidth in kbps. Values: 8 and 64 kbps
Echo Cancellation Enables or disables echo cancellation.
Silence Suppression Enables or disables silence suppression.
Type of Service The type of Service. Values: 1-256, where 1 indicates no service type
Resource Reservation The resource reservation type. Values:
• bestEffort
• guaranteed
• notUsed
• controlledLoad
Default COT Receive Tone The default receive tone. For transponder COT, when the media gateway controller does
not supply the tones, the default tone the gateway receives is the default COT receive tone.
Values:
• co1
• co2