Specifications

5-6
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 5 Call Control
Configuration Tasks for MGCP
Viewing MGCP Voice Parameters
The MGX 8260 Media Gateway uses threshold levels to determine when to send alerts to the MGC.
This command lists the current settings.
To view MGCP voice parameters, use the lsmgcpvoice command.
=============================================================
MGCP Voice parameters
=============================================================
Lower Bound for Packet Loss :
Higher Bound for Packet Loss :
Lower Bound for Jitter :
Higher Bound for Jitter :
Lower Bound for Latency :
Higher Bound for Latency :
Local Address 1 The IP address of the MGX 8260 interface for network 1. This address is on the same subnet
as the Primary MGCP IP Address.
Local Primary Port 1 The primary UDP port of the MGX 8260 interface for network 1.
Local Address 2 The IP address of the MGX 8260 interface for network 2. This address is on the same subnet
as the Primary MGCP IP Address.
Local Primary Port 2 The primary UDP port of the MGX 8260 interface for network 2.
Displayed Information Description
Displayed Information Description
Lower Bound for Packet Loss The packet loss level that enables an alert.
Higher Bound for Packet Loss The packet loss level that triggers an alert message. Once triggered, alert messages are
disabled until the level drops below the lower bound.
Lower Bound for Jitter The jitter level that enables an alert.
Higher Bound for Jitter The jitter level that triggers an alert message. Once triggered, alert messages are disabled
until the level drops below the lower bound.
Lower Bound for Latency The latency level that enables an alert.
Higher Bound for Latency The latency level that triggers an alert message. Once triggered, alert messages are disabled
until the level drops below the lower bound.