Specifications

4-33
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Announcement Services
Deactivating and Removing an Announcement
To deactivate and remove an announcement, follow this procedure.
Step 1 Deactivate the file using the deacannfile command, specifying the file ID. You can view file IDs using
the lsannfiles command.
Step 2 Optionally, remove the file using the rmannfile command, specifying the file ID. Since the system has
limited file capacity, you should remove announcements you no longer plan to use.
Viewing Announcement Files
To view details about a single file, use the lsannfile command. Specify the file ID for which you want
information.
The system displays the following information:
=========================================================
Announcement File (lsannfile)
=========================================================
File ID : 1
File Name : greeting.wav
File State : inactive
File Length(byte) : 80000
File Duration(second) : 10
File Encoding : g711mulaw
To view summary information about all files, use the lsannfiles command.
The system displays the following information:
==================================================
Announcement Files (lsannfiles)
==================================================
File ID File Name File State
====== ====================== ===============
1 greeting.wav inactive
2 hello.au active
To interpret the columns, refer to the previous procedure for lsannfile.
Displayed Information Description
File ID The numeric identifier of the file. The system
extracted this number from the file name when it
was downloaded.
File Name The name of the file on the SCC file system
File State The activation state of the announcement
File Length The file length, in bytes
File Duration The file duration, in seconds
File Encoding The file encoding, either g711mulaw,
g726encoding, or g711alaw