Specifications

4-32
Cisco MGX 8260 Command Line Interface Guide
Release 1.2, Part Number 78-10987-01 Rev. B0, January, 2002
Chapter 4 Service Management
Configuration Tasks for Announcement Services
File Types
The MGX 8260 Media Gateway supports the following file types:
• .au
• .wav
File Names
The Announcement Service uses a file identifier that it learns from the name you assign. Construct the
file name as follows:
fileName_ID.ext
The file name is the alphanumeric string before the underscore and the file identifier is the number after
the underscore. The id is a number from 1 to 100 and the file extension is either au or wav. The file
name can contain up to 20 characters total.
Configuration Tasks for Announcement Services
See the following sections for Announcement Service configuration:
• Adding and Activating an Announcement
• Deactivating and Removing an Announcement
• Viewing Announcement Files
Adding and Activating an Announcement
To add and activate an announcement, follow this procedure:
Step 1 Download the announcement message using tftp.
tftp ipAddress
bin
put sourceFile announceFile
Step 2 Activate the message using the acannfile command, identifying the file by ID rather than by name. You
can view file IDs using the lsannfiles command.
Step 3 The system copies the file from the download location on the SCC to all NSCs in the chassis.