Specifications

4-17

Cisco MGX 8230 Edge Concentrator Installation and Configuration

Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001

Chapter 4 Enclosure Installation

Rack Mounting an MGX 8230

Figure 4-13 Rear View of MGX 8230 with One AC Power Supply Module

Install the Cable Manager

A fully loaded MGX 8230 may have many cables attached to the rack’s modules. Cable management kits

are available for installation on the rear of rack modules. These kits provide the means to route the power

and data cables in a neat and orderly fashion to and from the modules in the MGX 8230. The cable

management system is shipped with attaching hardware along with your MGX 8230.

Install the cable management brackets after a rack mounted unit has been installed in a rack, or a

standalone MGX 8230 has been positioned. Figure 4-14 illustrates an installed cable management

system. When installing the cable management system on a rack-mount MGX 8230, the screws securing

the cable guides to the MGX 8230 chassis are inserted from the outside into the captive nuts in the

chassis. When installing the cable management system in a standalone MGX 8230, the screws securing

the cable guides to the MGX 8230 chassis are inserted from the outside into the captive nuts in the

chassis.

23824