User manual

2
Covad Confidential
Cisco IP Phone Turn-up Summary for New Installs*
Phone Location Configuration
Document
Overview of
Local Configuration Steps
Description of what happens to phone
1. Managed - New
Site For installing new
phones into new sites
using DHCP with
broadband connection
to Covad
Cisco IP Phone
Configuration
using DHCP
- see slides 3-8
2. Managed -
Existing Site For
adding new phones to
existing sites using
DHCP with broadband
connection to Covad
Cisco IP Phone
Configuration
using DHCP
- see slides 9-12
9 If phone is used, erase configuration
9 Plug phone in to network
9 Configure Alternate TFTP
9 Erase phone configuration
9 At “0000” invoke *51 procedure to bind number to phone
¾Gets IP address via DHCP from CPE router
¾ Gets intermediate firmware upgrade from
provisional TFTP server 72.245.184.79
¾ Gets VoIP settings, latest/current firmware
from primary TFTP server at 68.165.105.181
(SV2), 64.2.21.251 (SV1), 64.2.21.45 (SJ)
or 72.245.184.75 (DC)
¾ Extension bound to MAC address
3. Manual Method
.
For adds to existing
Managed sites where
DHCP not implemented
Cisco IP Phone
Configuration –
Manual
Method
- see slides 13-18
9 Configure phone IP settings via manual configuration
9 Plug phone into network
9 Configure primary TFTP
9 At 0000, invoke *51 procedure to bind number to phone
¾ Gets IP address as manually configured
¾ Gets intermediate firmware upgrade from
provisional TFTP server 72.245.184.79
¾ Gets VoIP settings, latest/current firmware
from primary TFTP server at 68.165.105.181
(SV2), 64.2.21.251 (SV1), 64.2.21.45 (SJ)
or 72.245.184.75 (DC)
¾ Extension bound to MAC address
4. Remote
Teleworker Remote
sites using public
Internet with
wandering WAN IP
address and 1 VOIP
device
Cisco IP Phone
Configuration for
Remote
Teleworker
without Static IP
- see slides 19-33
9 Configure phone IP settings via manual configuration
9 Plug phone into network
9 Configure CPE router (if required)
9 Configure primary TFTP
9 Configure MGCP Gateway Controller to address given by
Covad Provisioning (i.e., 64.2.21.54 or 66.151.0.41)
9 At 0000, invoke *51 procedure to bind number to phone
¾ Gets TFTP server manually configured
¾ Gets IP address via DHCP from CPE router
¾ Gets intermediate firmware upgrade from
provisional TFTP server 72.245.184.79
¾ Gets VoIP settings, latest/current firmware
from primary TFTP server at 68.165.105.182
(SV2), 64.2.21.250 (SV1), 64.2.21.243 (SJ)
or 74.245.184.76 (DC)
¾ Extension bound to MAC address
9 If phone is used, erase configuration
9 Plug phone in to network
9 Configure router for primary TFTP
9 At “0000” invoke *51 procedure to bind number to phone
¾ Gets IP address via DHCP from CPE router
¾ Gets intermediate firmware upgrade from
provisional TFTP server 72.245.184.79
¾ Gets VoIP settings, latest/current firmware
from primary TFTP server at 68.165.105.181
(SV2), 64.2.21.251 (SV1), 64.2.21.45 (SJ)
or 72.245.184.75 (DC)
¾ Extension bound to MAC address
Covad offers several stream-lined ways to provision Cisco IP phones on our network, depending upon the type of circuit.