Datasheet

10
Release Notes for Cisco IOS Release 12.0(7)XV Feature Packs for the Cisco 800 Series
78-10446-01
System Requirements
The Cisco 800 series routers also support the features listed in Table 7.
IPX and SPX Spoofing No No Yes No No No Yes
ISDN Caller ID Callback Yes Yes Yes Yes Yes Yes Yes
Snapshot Routing Yes Yes Yes Yes Yes Yes Yes
Stac Compression Yes Yes Yes Yes Yes Yes Yes
Time-based Access Lists (3)T Yes Yes Yes Yes Yes Yes Yes
X.25 ID No Yes Yes No Yes Yes Yes
1. Advanced Telephone Features are available on the Cisco 803 and 804 routers only. These features require supplementary services from a
telephone company.
2. The X.25 configuration feature requires the use of the Cisco command line interface (CLI).
3. Interoperability with Certification Authority servers from VeriSign is not supported for IPSec in Release 12.0(5)T and earlier releases on Cisco 800
series routers.
4. The CAPI and RCAPI feature is part of the base software image, therefore it is included in all images.
Table 6 Feature List by Feature Set for the Cisco 801–804 Routers (continued)
Feature Set
Features In IP IP Plus
IP/IPX
Plus IP/FW
IP/FW
Plus
IP/FW/Plus/
IPSEC56
(VPN)
IP/IPX/FW/
IPSEC56/
Plus
Table 7 Additional Features supported by Cisco 800 Routers
Feature IP IP Plus IP/IPX Plus IP/FW IP/FW Plus
IP/FW/Plus/
IPSec
IP/FW/Plus/
IPSec Plus
Routed Protocol IP IP IP/IPX IP IP IP IP/IPX
Routing Protocol RIP
Snapshot
RIP/IP-
EIGRP
Snapshot
RIP/IP-
EIGRP/
IPX WAN
Snapshot
RIP/IP-
EIGRP
Snapshot
RIP/IP-
EIGRP
Snapshot
RIP/IP-
EIGRP
Snapshot
RIP/IP-
EIGRP/
IPX WAN
Snapshot
Tunneling GRE GRE GRE GRE GRE
X.25 X.25 X.25 X.25 X.25 X.25
SNTP (Simple
Network Time
Protocol)
SNTP SNTP SNTP SNTP SNTP SNTP SNTP
Multicast IP Multicast
Forwarding
IP Multicast
Forwarding
IP Multicast
Forwarding
IP Multicast
Forwarding
IP Multicast
Forwarding
Management SNMP SNMP/
SYSLOG
SNMP/
SYSLOG
SNMP SNMP/
SYSLOG
SNMP/
SYSLOG
SNMP/
SYSLOG
Manual ISDN Calls
(see reference for
commands)
Yes Yes Yes Yes Yes Yes Yes