Datasheet

65
OL-17436-01
Additional Configuration and Maintenance Tasks
8. reload
DETAILED STEPS
Command or Action Purpose
Step 1
Connect a terminal to the primary RP
console port and log in to the router.
Connects a terminal or PC to the primary RP
console port and logs in to the router
Step 2
configure
Example:
Router# configure
Enters global configuration mode.
Step 3
config-register value
Example:
Router(config)# config-register 0x0
Sets the configuration register to the assigned
value in the running configuration.
• See the Commonly Used Configuration
Register Value Settings section for more
information.
• Changes take effect when you reload the
router.
Caution Resetting the configuration register
may change the baud rate for the
console.
Step 4
commit
Example:
Router(config)# commit
Saves the changes to the running configuration.
Caution You must commit the setting and enter
the no config-register 0x0 command
for the settings to take effect.
Step 5
no config register 0x0
Example:
Router(config)# no config regsiter
0x0
Prevents unwanted changes to the configuration
register at a later point, and guarantees the setting
is the same between the Cisco IOS XR software
and the ROM monitor.
Step 6
commit
Example:
Router(config)# commit
Saves the changes to the running configuration.