Datasheet
55
OL-17436-01
Configuring Interfaces on the PRP-3
Table 17 provides examples of Management Ethernet interface names for a single-shelf system.
Displaying the Available Management Ethernet Interfaces
To display the router interfaces, enter the show interfaces brief command in EXEC mode as follows:
RP/0/0/CPU0:router# show interfaces brief
Intf Intf LineP Encap MTU BW
Name State State Type (byte) (Kbps)
--------------------------------------------------------------------------------
Nu0 up up Null 1500 Unknown
Mg0/0/CPU0/0 up up ARPA 1514 100000
Mg0/0/CPU0/1 admin-down admin-down ARPA 1514 10000
PO0/3/0/0 admin-down admin-down HDLC 4474 155520
PO0/3/0/1 admin-down admin-down HDLC 4474 155520
PO0/3/0/2 admin-down admin-down HDLC 4474 155520
PO0/3/0/3 admin-down admin-down HDLC 4474 155520
PO0/3/0/4 admin-down admin-down HDLC 4474 155520
PO0/3/0/5 admin-down admin-down HDLC 4474 155520
PO0/3/0/6 admin-down admin-down HDLC 4474 155520
PO0/3/0/7 admin-down admin-down HDLC 4474 155520
.
.
.
The Management Ethernet interfaces are listed with the prefix Mg in the Intf Name column.
module On an RP, the module is “CPU0.” DRPs have two processors, so the
module is either “CPU0” and “CPU1.”
port On Cisco XR 12000 Series Routers, there are three Ethernet ports on
PRP-2 cards. The Ethernet ports are labeled ETH 0, ETH 1, and ETH 2.
For the ETH 0 port, specify 0, for the ETH 1 port, specify 1, and for the
ETH 2 port, specify 2.
Table 16 Management Ethernet Interface Name Syntax Description (Continued)
Syntax Components Description
Table 17 Management Ethernet Interface Names for Single-Shelf Systems
Management Interface Interface Name Example
Cisco XR 12000 Series Router
PRP-3 in slot 0, port ETH0
MgmtEth0/0/CPU0/0 router(config)# interface MgmtEth0/0/CPU0/0
Cisco XR 12000 Series Router
PRP-3 in slot 0, port ETH1
MgmtEth0/0/CPU0/1 router(config)# interface MgmtEth0/0/CPU0/1
Cisco XR 12000 Series Router
PRP-3 in slot 1, port ETH0
MgmtEth0/1/CPU0/0 router(config)# interface MgmtEth0/1/CPU0/0
Cisco XR 12000 Series Router
PRP-3 in slot 1, port ETH1
MgmtEth0/1/CPU0/1 router(config)# interface MgmtEth0/1/CPU0/1