Datasheet

OL-17436-01

Checking the Installation

Table 8 displays the alphanumeric LED messages and the console output when the chassis is loaded from

ROMMON.

Table 8 Single PRP-3 Scenario — Chassis loaded from ROMMON

Dual PRP-3 Scenario

If dual PRP-3s are installed and the chassis is powered on or a board is inserted, all the LED messages

are same as for a single PRP-3, except for an LED message ‘1404/MRAM’ that is displayed on the front

panel when the console display is as follows:

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

RUN/IOX Displays “RP/0/2/CPU0:Sep 10 15:56:29.018: syslogd_helper: [84]:

dsc_event_handler: Got SysMgr dSC

event : 1

RP/0/2/CPU0:Jan 1 00:00:04.809 : mbus-prp3[58]: mbus-prp3:

mbus_platform_init() failed (0x6).

RP/0/2/CPU0:Sep 10 15:56:07.015 : dumper[53]: No HDD Controller found

by process dumper

RP/0/2/CPU0:Sep 10 15:56:21.538 : sysmgr[85]: %OS-SYSMGR-5-NOTICE

: Card is COLD started

RP/0/2/CPU0:Sep 10 15:56:22.622 : dsc[169]: Memory Sanity Check Enabled

RP/0/2/CPU0:Sep 10 15:56:29.007 : dsc[169]:

%PLATFORM-DSC-3-ERR_I_AM_DSC : Setting myself as DSC

RP/0/2/CPU0:Sep 10 15:57:20.071 : sysldr[370]:

%PLATFORM-POWERMGR-3-ROM_ERROR_STATUS :

Unable to get Mbus ROM status from SYSDB. Error ='sysdb' detected the

'warning' condition 'A SysDB client tried to access a nonexistent item or list an

empty directory'

RP/0/2/CPU0:Sep 10 15:57:25.078 : sysldr[370]: %

PLATFORM-SYSLDR-6-INFO : Waiting for startup config to be applied

before booting LCs

Primary Clock is CSC_1 Fabric Clock is Redundant

Bandwidth Mode : Full Bandwidth”

RP/ACTV When RP is up and running Cisco IOS XR software.

LED Display Description or Console Message

INIT/NV Displays the LED message during the initialization of the NVRAM infra code.

OK/RIO Displays the LED message immediately when the board is powered ON.

OK/CPU Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".

CONT...