Datasheet

15
Using the Flash Disk
OL-6452-04
Installing a Flash Disk
Figure 4 Installing and Ejecting a Flash Disk in a Horizontally Oriented System
Step 3
Hold the Flash Disk with its connector end toward the PC Card slot and its front label facing up.
The Flash Disk is keyed and cannot be seated the wrong way. The ejector button does not pop out if the
Flash Disk is not completely inserted.
Step 4 Insert the Flash Disk into the PC Card slot until the Flash Disk completely seats in the connector at the
rear of the slot, and the ejector button pops out toward you.
(See b of Figure 4).
The Flash Disk does not insert all the way inside the PC Card slot; a portion of the Flash Disk remains
outside the slot. Do not attempt to force the Flash Disk past this point.
Step 5 To eject a Flash Disk, press the appropriate ejector button—located to the right of the slot—until the
Flash Disk is free of the connector at the rear of the PC Card slot.
(See c of Figure 4.)
a
13335
b
EJECT
UP
EJECT
UP
c
EJECT
UP