Datasheet

Using the Flash Disk

OL-6452-04

Installing a Flash Disk

Step 3 Insert the Flash Disk into the PC Card slot until the Flash Disk completely seats in the connector at the

rear of the slot and the ejector button pops out toward you.

(See b of Figure 1.)

The Flash Disk does not insert all the way inside the PC Card slot. A portion of the Flash Disk remains

outside the slot. Do not attempt to force the Flash Disk past this point.

Figure 1 Installing and Ejecting a Flash Disk in a Vertically Oriented System

Step 4

To eject a Flash Disk, press the ejector button—located below the slot—until the Flash Disk is free of

the connector at the rear of the PC Card slot. (See c of Figure 1.)

Step 5 Remove the Flash Disk from the slot and place it in an antistatic bag.

This completes the procedure for installing and removing a Flash Disk in a vertically oriented system.

Proceed to the “Working with a Flash Disk” section on page 16.

EJECT

13334