Datasheet
Table Of Contents
- Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules- IP Telephony and User-Mobility Support with Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules
- Cisco Catalyst Prestandard Inline Power and IEEE 802.3AF POE
- Powered Device Discovery
- Auxiliary VLAN
- Cisco IBNS
- Enhanced Operational Control for Enhanced Manageability
- Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Modules
- Cisco Catalyst 6500 Series Cisco Express Forwarding 720 10-, 100-, And 1000-MBPS Ethernet-over-Copper Modules
- Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 Interface Modules
- Cisco Catalyst 6500 Series PoE, Classic 10/100, and 10/100/1000 Interface€Modules
- Cisco Catalyst 6500 Series Data-Only Classic Gigabit Ethernet-over-Copper Interface Module
- Ordering Information
- Ordering Information: DFC Daughter Cards
- Specifications
- Service and Support
- For More Information
 

Solution Overview 
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.  Page 3 of 18 
Cisco Catalyst Prestandard Inline Power and IEEE 802.3AF POE 
Using existing Category 5 UTP installations, the PoE feature helps enable network administrators 
to control power distribution from a central location. Configuring Cisco Catalyst 6500 Series 
switches with uninterruptible-power-supply (UPS) systems helps ensure that building power 
outages will not affect network telephony connections, providing greater network availability. 
Enabled by a daughter card for “pay-as-you-grow” flexibility, several Cisco Catalyst 6500 
Series 10/100 and 10/100/1000 Ethernet interface modules support PoE. Some of these interface 
modules support the IEEE 802.3af standard as an additional upgrade option. The Cisco Catalyst 
PoE feature implementation passes the required domestic and international safety regulations 
and compliance measures. 
All Cisco Catalyst 6500 Series 802.3af PoE modules support all three classes of powered devices, 
delivering a maximum of 15.4W per port as defined in the standard: 
● 
Class 1: Up to 4W per port 
● 
Class 2: Up to 7W per port 
● 
Class 3: Up to 15.4W per port 
All 802.3af PoE modules are capable of supporting up to 48 Class 3 devices per module (that is, 
15.4W per port for 48 ports simultaneously). The maximum number of powered devices supported 
in a system for each class depends on the specific system configuration such as chassis type, 
supervisor engine, and power supply used. (Refer to Table 1.) 
Table 1.  Cisco Catalyst 6500 Series PoE Products 
Product Number  Speed  IEEE 802.3af 
PoE Support 
Cisco 
Prestandard 
PoE Support 
Maximum Power 
per Port 
WS-X6548-GE-45AF  10/100/1000  Yes  Yes  15.4W 
WS-X6548V-GE-TX  10/100/1000  Field upgradeable 
with WS-F6K-
GE48-AF= 
daughter card 
Yes  7W; 15.4W with 
WS-F6K-GE48-
AF= daughter card 
upgrade 
WS-X6148A-GE-45AF  10/100/1000  Yes  Yes  15.4W 
WS-X6148-GE-45AF  10/100/1000  Yes  Yes  15.4W 
WS-X6148V-GE-TX  10/100/1000  Field upgradeable 
with WS-F6K-
GE48-AF= 
daughter card 
Yes  7W; 15.4W with 
WS-F6K-GE48-
AF= daughter card 
upgrade 
WS-X6348-RJ45V  10/100  No  Yes  7W 
WS-X6348-RJ21V  10/100  No  Yes  7W 
WS-X6196-21AF  10/100  Yes  Yes  15.4W 
WS-X6148X2-45AF  10/100  Yes  Yes  15.4W 
WS-X6148A-45AF  10/100  Yes  Yes  15.4W 
WS-X6148-45AF  10/100  Yes  Yes  15.4W 
WS-X6148-RJ45V  10/100  Yes (part number 
WS-X6148-45AF-
UG=) for upgrade 
Yes  7W 
WS-X6148-21AF  10/100  Yes  Yes  15.4W 
WS-X6148-RJ21V  10/100  Yes; Use 
(part number WS-
X6148-21AF-UG=) 
for upgrade 
Yes  7W 










