Datasheet

ManualsBrandsCisco ManualsNetworkingMEM-DFC-256MB=

Table Of Contents

Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules

Data Sheet

Cisco Catalyst 6500 Series 10/100 and 10/100/1000

Ethernet Interface Modules

As the premier Cisco

modular multilayer switch, the Cisco Catalyst

6500 Series delivers

secure, converged services from the wiring closet to the core, to the data center, and to

the WAN edge.

The Cisco Catalyst 6500 Series provides the broadest selection of 10/100 and 10/100/1000

Ethernet media, Power over Ethernet (PoE) (inline power) options, densities, performance,

interoperability, and chassis deployment options. From basic wiring closets and small campus

distribution and core layers to high-performance data centers, the Cisco Catalyst 6500 Series

10/100BASE-TX modules scale from 16 ports up to 1152 ports, and the 10/100/1000BASE-TX

modules scale from 16 ports up to ports in a single Cisco Catalyst 6500 Series chassis. Cisco

Catalyst 6500 Series 10/100 and 10/100/1000 modules offer:

●

Proven and widely deployed Cisco AVVID (Architecture for Voice, Video and

Integrated Data) wiring-closet solution: These modules are the most widely deployed

Cisco IP Telephony port-enabled campus switch.

●

Choice of media and connector types: These modules are available in copper

unshielded twisted-pair (UTP) and shielded twisted-pair (STP) using RJ-45 or RJ-21.

Note: Refer to the “Cisco Catalyst 6500 Series Mixed-Media Gigabit Ethernet Interface

Modules” data sheet for information about modular physical layer deployment options using gigabit

interface converters (GBICs) and Small Form-Factor Pluggable (SFP) form factors.

●

IEEE 802.3af PoE support (for example, IP phone and wireless access point): These

modules support PoE field upgrade, network-interface-card (NIC) and phone auto detection

(phone discovery), and voice VLANs.

●

Simplified network operation with cable fault detection: These modules offer the ability

to test cabling using a time domain reflectometer (TDR), which sends signals down the

cable to identify faults in each twisted pair (available on some 10/100 and all 10/100/1000

Ethernet-over-copper interface modules).

●

Range of port densities: These modules are available with 16 to 96 ports per module,

enabling up to 1152 10/100BASE-TX ports or 576 10/100/1000BASE-TX ports per 13-slot

chassis (configured with 12 interface modules).

●

Scalable and predictable system performance: These modules provide a selection of

switch-fabric connections and throughput options:

●

32-, 256-, and 720-Gbps bandwidth with a system throughput of: 15, 30, 210, and up to

400 Mpps.

●

IEEE 802.3 triple-speed autonegotiation: These modules allow switches to negotiate

speed (10, 100, and 1000 Mbps) and duplex mode (half or full) with attached devices.

Summary of content (18 pages)

PAGE 1
Data Sheet Cisco Catalyst 6500 Series 10/100 and 10/100/1000 Ethernet Interface Modules ® ® As the premier Cisco modular multilayer switch, the Cisco Catalyst 6500 Series delivers secure, converged services from the wiring closet to the core, to the data center, and to the WAN edge.
PAGE 2
Solution Overview ● Superior traffic management: These modules are available with large (up to 1 MB per interface) buffers, and up to 4 transmit queues to aid in congestion avoidance, traffic prioritization, and policing; multiple thresholds can be configured to manage differentiated levels of service.
PAGE 3
Solution Overview Cisco Catalyst Prestandard Inline Power and IEEE 802.3AF POE Using existing Category 5 UTP installations, the PoE feature helps enable network administrators to control power distribution from a central location. Configuring Cisco Catalyst 6500 Series switches with uninterruptible-power-supply (UPS) systems helps ensure that building power outages will not affect network telephony connections, providing greater network availability.
PAGE 4
Solution Overview Powered Device Discovery The Powered Device Discovery feature eases network-management burdens by automating the PoE feature. With Powered Device Discovery, the Cisco Catalyst switch detects the presence of a powered device and supplies inline power automatically, eliminating the need to manually enable ports for inline power.
PAGE 5
Solution Overview The Cisco Catalyst 6500 Series offers advanced network-management features to make it easy to manage fast-growing networks. This includes TDR supported on the new 48-port 10- and 100Mbps and all the 48-port 10-, 100-, and 1000-Mbps Ethernet modules (part numbers WS-X6148ARJ-45, WS-X6148A-45AF, WS-X6148A-GE-TX, WS-X6148A-GE-45AF, WS-X6148-GE-TX, WS-X6548-GE-TX, and WS-X6748-GE-TX, respectively).
PAGE 6
Solution Overview Feature Supervisor Engine Supported Classic Interface Modules Cisco Express Forwarding 256 Interface Modules ● Supervisor Engine 1A ● Supervisor Engine 2 ● Supervisor Engine 1A ● Supervisor Engine 2 ● Supervisor Engine 720 ● Supervisor Engine 720 ● Use WS-F6K-DFC) with Supervisor Engine 2 and switch fabric module 2 (SFM2) ● Use WS-F6K-DFC3) with Supervisor Engine 720 Cisco Express Forwarding 720 Interface Modules Supervisor Engine 720 Use WS-F6700-DFC3) with Supervisor Engine 720
PAGE 7
Solution Overview PoE is not supported on Cisco Express Forwarding 720 10/100/1000 interface modules. Note: Table 3.
PAGE 8
Solution Overview ● Supervisor engine: These modules work with Supervisor Engine 1A, Supervisor Engine 2, or Supervisor Engine 720. ● Slot requirements: These modules can occupy any slot in any Cisco Catalyst 6500 Series chassis. ● Maximum port density per chassis (48-port modules): These modules support up to 576 ports per Cisco Catalyst 6513, and up to 384 ports per Cisco Catalyst 6509.
PAGE 9
Solution Overview Product Number Primary Application Ports, Connector, Maximum Distance, and Cable Type PoE Support Maximum Frame Size (jumbo frame) Support Queues per Port (Tx= Transmit, Rx = 3 Receive) Buffer Size per Port WS-X6548GE-45AF Premier wiring closet 48, RJ-45, 100m, Category 5 cable Yes (both IEEE 802.3af and Cisco Prestandard) Up to 1518 bytes per frame Tx-1p2q2t (per 8 ports) 1.
PAGE 10
Solution Overview Cisco Catalyst 6500 Series PoE, Classic 10/100, and 10/100/1000 Interface Modules Designed for deployment in wiring closets, high-density Cisco Catalyst 6500 Series Classic 10/100 and 10/100/1000 interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth to the desktop capabilities. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility.
PAGE 11
Solution Overview ● Maximum port density per chassis: These modules support up to 1152 10/100 ports or 576 10/100/1000 ports in the Cisco Catalyst 6513 chassis; up to 768 10/100 ports or 384 10/100/1000 ports in the Cisco Catalyst 6509 chassis; up to 480 10/100 ports or 240 10/100/1000 ports in the Cisco Catalyst 6506 chassis; and up to 192 10/100 ports or 96 10/100/1000 ports in the small-form-factor Cisco Catalyst 6503 chassis.
PAGE 12
Solution Overview Product Number Primary Application Ports, Connector, Maximum Distance, and Cable Type PoE Support Maximum Frame Size (jumbo frame) Support Queues per Port (Tx= Transmit, Rx= 4 Receive) Buffer Size per Port WS-X6196RJ-21 Wiring closet 96, RJ-21, 100m, Category 5 cable Fieldupgradable to Cisco Prestandard and IEEE 802.3af Up to 9216 bytes per frame Tx-1p3q1t 1116 KB WS-X619621AF Wiring closet 96, RJ-21, 100m, Category 5 cable Yes (both IEEE 802.
PAGE 13
Solution Overview Figure 5. Cisco Classic 48-Port 10/100/1000 Module (part number WS-X6148A-GE-TX) with 802.3af PoE Daughter (floating above) (part number WS-F6K-GE48-AF) Figure 6. Cisco Classic 96-Port 10/100 802.3af PoE Module (part number WS-X6148X2-45AF) Figure 7. Cisco Classic 48-Port 10/100 802.3af PoE Module (part number WS-X6148A-RJ-45) Figure 8. Cisco Classic 48-Port 10/100 802.3af PoE Module, RJ-21 (part number WS-X6148-21AF) Figure 9.
PAGE 14
Solution Overview Cisco Catalyst 6500 Series Data-Only Classic Gigabit Ethernet-over-Copper Interface Module Designed for distribution and core layers and for data-center and Web-hosting applications, the Cisco Catalyst 6500 Series Classic 16-port Gigabit Ethernet interface modules provide line-rate Gigabit Ethernet forwarding with the following operational advantages: ● Forwarding architecture: These modules use centralized Cisco Express Forwarding.
PAGE 15
Solution Overview Product Number Description 10/100 WS-X6548-RJ-45 Cisco Catalyst 6500 Series 48-Port Cisco Express Forwarding 256 10/100 RJ-45 Interface Module; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS-F6K-DFC= or DFC3) WS-X6548-RJ-21 Cisco Catalyst 6500 Series 48-Port, Cisco Express Forwarding 256 10/100 RJ-21 Interface Module; field-upgradable to support distributed forwarding with the addition of the distribute
PAGE 16
Solution Overview Ordering Information: DFC Daughter Cards Table 8 provides part-number information for distributed forwarding daughter cards for the Cisco Catalyst 6500 Series Cisco Express Forwarding 256 and Cisco Express Forwarding 720 Ethernet interface modules. Table 8.
PAGE 17
Solution Overview ● EN 60825 ● 21CFR1040 EMC Compliance ● FCC Part 15 (CFR 47) Class A ● VCCI Class A with UTP, Class B with STP ● EN55022 Class A with UTP, Class B with STP ● CISPR 22 Class A with UTP, Class B with STP ● CE marking ● AS/NZS 3548 Class A with UTP, Class B with STP Network Management ● ETHERLIKE-MIB (RFC 1643) ● IF-MIB (RFC 1573) ● Bridge MIB (RFC 1493) ● CISCO-STACK-MIB ● CISCO-VTP-MIB ● CISCO-CDP-MIB ● RMON MIB (RFC 1757) ● CISCO-PAGP-MIB ● CISCO-STP-Exten
PAGE 18
Solution Overview ● Status: Green (operational); red (faulty); orange (module booting or running diagnostics) ● Link good: Green (port active); orange (disabled); off (not active or not connected); blinking orange (failed diagnostic and disabled) ● 10, 100, and 1000 Mbps: RJ-45 (female) ● 10/100BASE-TX and 100BASE-TX: RJ-45 (female) Service and Support Cisco offers a wide range of services programs to accelerate customer success.