Specifications

Index
IN-7
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-23401-02
modes, commands 1-1
more (boot loader) command A-19
MPLS
displaying VFIs
3-152
experimental field 3-13
VCs 4-98
VFI configuration 2-127
MSTP
displaying
3-141
interoperability 2-39
link type 4-25
MST region
aborting changes
4-30
applying changes 4-30
configuration name 4-30
configuration revision number 4-30
current or pending display 4-30
displaying 3-141
MST configuration mode 4-30
VLANs-to-instance mapping 4-30
path cost 4-32
protocol mode 4-29
restart protocol migration process 2-39
root port
loop guard
4-23
preventing from becoming designated 4-23
restricting which can be root 4-23
root guard 4-23
root switch
affects of extended system ID
4-22
hello-time 4-35, 4-42
interval between BDPU messages 4-36
interval between hello BPDU messages 4-35, 4-42
max-age 4-36
maximum hop count before discarding
BPDU
4-37
port priority for selection of 4-38
primary or secondary 4-42
switch priority 4-41
state changes
blocking to forwarding state
4-48
enabling BPDU filtering 4-14, 4-46
enabling BPDU guard 4-16, 4-46
enabling Port Fast 4-46, 4-48
forward-delay time 4-34
length of listening and learning states 4-34
rapid transition to forwarding 4-25
shutting down Port Fast-enabled ports 4-46
state information display 3-140
MTU, configuring size 2-181
mtu command 2-181
multicast router ports, configuring 2-112
multicast storm control 4-55
Multiple Spanning Tree Protocol
See MSTP
multiprotocol label switching
See MPLS
N
native VLANs 4-71
native VLAN tagging 4-95
neighbor command, VFI configuration mode 2-127
network-clock_select command 2-43, 2-45
network-clock hold-off command 2-182
network-clock input-source command 2-183
network clock priority 2-194
network-clock revertive command 2-185
network-clock-select command 2-188
network-clock-select hold-off timeout command 2-189
network-clock-select hold-timeout command 2-190
network-clock-select mode command 2-192
network-clock-select option command 2-193
network-clock-select output command 2-194
network-clock-select wait-to-restore command 2-195
network-clock synchronization ssm option
command
2-186
network-clock wait-to-restore command 2-187