Specifications

-133
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-23401-02
Chapter
show policy-map
Examples This is an example of the output of the show policy-map interface command showing statistics for an
output policy map.
Switch# show policy-map interface gigabitethernet 0/2
GigabitEthernet0/2
Service-policy output: phb
Class-map: phb (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: cos 2
Bandwidth 1000 (kbps)
Queue-limit current-queue-depth 0 bytes
Output Queue:
Tail Packets Drop: 0
Tail Bytes Drop: 0
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
This is an example of output from the show policy-map command for a specific policy map:
Switch> show policy-map top2
Policy Map top2
Class class-default
shape average 11111124
service-policy pout
This is an example of output from the show policy-map command for an output policy map:
Switch> show policy-map pout
Policy Map pout
Class ip1
priority
police cir percent 10
conform-action transmit
exceed-action drop
queue-limit 250
queue-limit precedence 1 100
Class ip2
Average Rate Traffic Shaping
cir 5%
Class ip3
bandwidth percent 10
queue-limit 200
queue-limit precedence 3 100
This is an example of output from the show policy-map command for an input policy map:
Switch> show policy-map pin-police
Policy Map pin-police
Class ip1
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
violate-action drop