Specifications

-61
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-23401-02
Chapter
show ethernet service evc
show ethernet service evc
To display information about Ethernet virtual connection (EVC) customer-service instances, use the
show ethernet service evc command in privileged EXEC mode.
show ethernet service evc [id evc-id | interface interface-id] [detail] [summary] [ | {begin |
exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show ethernet service evc command:
Switch# show ethernet service evc
Identifier Type Act-UNI-cnt Status
BLUE P-P 2 Active
PINK MP-MP 2 PartiallyActive
PURPLE P-P 2 Active
BROWN MP-MP 2 Active
GREEN P-P 3 Active
YELLOW MP-MP 2 PartiallyActive
BANANAS P-P 0 InActive
TEST2 P-P 0 NotDefined
ORANGE P-P 2 Active
TEAL P-P 0 InActive
Related Commands
id evc-id (Optional) Displays EVC information for the specified service. The EVC
identifier can be a string of from 1 to 100 characters.
interface interface-id (Optional) Displays EVC information for the specified interface.
detail (Optional) Displays detailed information about EVC service or the specified
EVC ID or interface.
summary (Optional) Displays summary of information for EVC service or the specified
EVC interface.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
Command Description
ethernet evc evc-id Defines an EVC and enters EVC configuration mode.