Specifications

C-41

Cisco ME 3400 Ethernet Access Switch Command Reference

OL-9640-07

Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands

show platform spanning-tree synchronization

Use the show platform spanning-tree synchronization privileged EXEC command to display

platform-dependent spanning-tree state synchronization information.

show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |

include} expression]

Syntax Description

Command Modes Privileged EXEC

Command History

Usage Guidelines You should use this command only when you are working directly with your technical support

representative while troubleshooting a problem. Do not use this command unless your technical support

representative asks you to do so.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

detail (Optional) Display detailed spanning-tree synchronization information.

vlan vlan-id (Optional) Display spanning-tree synchronization information for the specified

VLAN. The range is 1 to 4094.

| begin (Optional) Display begins with the line that matches the expression.

| exclude (Optional) Display excludes lines that match the expression.

| include (Optional) Display includes lines that match the specified expression.

expression Expression in the output to use as a reference point.

Release Modification

12.2(25)EX This command was introduced.