Specifications

C-26
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform policer cpu
show platform policer cpu
Use the show platform policer cpu privileged EXEC command to display CPU control-plane policer
statistics per feature or the indexes and the corresponding feature for the specified port.
show platform policer cpu {classification | interface interface-id} [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines For CPU protection of user network interfaces (UNIs) and enhanced network interfaces (ENIs), the
switch pre-allocates the 27 CPU protection policers, numbered 0 to 26. A policer of 26 means a drop
policer; any traffic type shown as 26 on any port is dropped. A policer of a value of 0 to 25 means that
a rate-limiting policer is assigned to the port for the control protocol. A policer value of 255 means that
no policer is assigned to a control protocol. Network node interfaces (NNIs) have no policers assigned.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
classification Displays policer statistics per feature.
interface
interface-id
Display the policer indexes for a specific interface.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.