Specifications

C-4
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform cfm
show platform cfm
Use the show platform cfm privileged EXEC command to display platform-dependent Ethernet
Connectivity Fault Management (CFM) information. CFM is an end-to-end per-service-instance
Ethernet layer operation, administration, and management (OAM) protocol that provides proactive
connectivity monitoring, fault verification, and fault isolation for large Ethernet networks.
show platform cfm [ | {begin | exclude | include} expression]
This command is supported only when the switch is running the metro IP access or metro access image.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SEG This command was introduced.