Specifications

B-58
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
debug platform tcam
Note Though visible in the command-line help strings, the log l3 ipv6 {acl {input | output} | local | qos |
secondary} keywords are not supported.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform tcam command is the same as the no debug platform tcam command.
Related Commands
read {reg | ssram | tcam} Display TCAM-read debug messages. The keywords have these
meanings:
• reg—Display TCAM-register read debug messages.
• ssram—Display synchronous static RAM (SSRAM)-read debug
messages.
• tcam—Display TCAM-read debug messages.
search Display supervisor-initiated TCAM-search results debug messages.
write {forw-ram | reg |
tcam}
Display TCAM-write debug messages. The keywords have these
meanings:
forw-ram—Display forwarding-RAM write debug messages.
reg—Display TCAM-register write debug messages.
tcam—Display TCAM-write debug messages.
Release Modification
12.2(25)EX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.