Specifications

B-38
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
debug platform ipc
debug platform ipc
Use the debug platform ipc privileged EXEC command to enable debugging of the platform-dependent
Interprocess Communication (IPC) Protocol. Use the no form of this command to disable debugging.
debug platform ipc {all | init | receive | send | trace}
no debug platform {all | init | receive | send | trace}
This command is available only when the switch is running the metro access or metro IP access image.
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform ipc command is the same as the no debug platform ipc.
Related Commands
all Display all platform IPC debug messages.
Note Using this command can degrade the performance of the switch.
init Display debug messages related to IPC initialization.
receive Display IPC traces each time an IPC packet is received by the switch.
send Display IPC traces each time an IPC packet is sent by the switch.
trace Display IPC trace debug messages, tracing the code path as the IPC functions are
executed.
Release Modification
12.2(25)EX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.