Specifications

B-29

Cisco ME 3400 Ethernet Access Switch Command Reference

OL-9640-07

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug platform ip arp inspection

Use the debug platform ip arp inspection privileged EXEC command to debug dynamic Address

Resolution Protocol (ARP) inspection events. Use the no form of this command to disable debugging.

debug platform ip arp inspection {all | error | event | packet | rpc}

no debug platform ip arp inspection {all | error | event | packet | rpc}

Syntax Description

Defaults Debugging is disabled.

Command Modes Privileged EXEC

Command History

Usage Guidelines The undebug platform ip arp inspection command is the same as the no debug platform ip arp

inspection command.

Related Commands

all Display all dynamic ARP inspection debug messages.

error Display dynamic ARP inspection error debug messages.

event Display dynamic ARP inspection event debug messages.

packet Display dynamic ARP inspection packet-related debug messages.

rpc Display dynamic ARP inspection remote procedure call (RPC) request debug

messages.

Release Modification

12.2(25)EX This command was introduced.

12.2(50)SE The command was supported in the metro base image.

Command Description

show ip arp inspection Displays the dynamic ARP inspection configuration and operating state.

show debugging Displays information about the types of debugging that are enabled.