Specifications

B-22
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
debug platform cfm
debug platform cfm
Use the debug platform cfm privileged EXEC command to enable debugging of the Ethernet
Connectivity Fault Management (CFM) service. Use the no form of this command to disable debugging.
debug platform cfm
no debug platform cfm
This command is supported only when the switch is running the metro IP access or metro access image.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines CFM is an end-to-end, per-service-instance, Ethernet layer operation, administration, and management
(OAM) protocol. It provides connectivity monitoring, fault verification, and fault isolation for large
Ethernet networks.
The undebug platform cfm command is the same as the no debug platform cfm command.
Related Commands
Release Modification
12.2(25)SEG This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.