Specifications

2-34
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
class
• police: defines an individual policer or aggregate policer for the classified traffic. The policer
specifies the bandwidth limitations and the action to take when the limits are exceeded. For more
information, see the
police and police aggregate (policy-map class configuration) policy-map
class commands.
• priority: sets the strict scheduling priority for this class or, when used with the police keyword, sets
priority with police. For more information, see the
priority policy-map class command.
• queue-limit: sets the queue maximum threshold for Weighted Tail Drop (WTD). For more
information, see the
queue-limit command.
• service-policy: configures a QoS service policy to attach to a parent policy map for an input or
output policy. For more information, see the
service-policy (policy-map class configuration)
command.
• set: specifies a value to be assigned to the classified traffic. For more information, see the set
commands.
• shape average: specifies the average traffic shaping rate. For more information, see the shape
average command.
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
Examples This example shows how to create a policy map called policy1, define a class class1, and enter
policy-map class configuration mode to set a criterion for the class.
Switch(config)# policy-map policy1
Switch(config-pmap)# class class1
Switch(config-pmap-c)# set dscp 10
Switch(config-pmap-c)# exit
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command Description
class-map Creates a class map to be used for matching packets to the class whose
name you specify.
policy-map Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
show policy-map Displays QoS policy maps.
show policy-map
interface [interface-id]
Displays policy maps configured on the specified interface or on all
interfaces.