Specifications

2-532
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show vlan
This is an example of output from the show vlan internal usage command. It shows that VLANs 1025
and 1026 are being used as internal VLANs for Fast Ethernet routed ports 23 and 24. If you want to use
one of these VLAN IDs, you must first shut down the routed port, which releases the internal VLAN,
and then create the extended-range VLAN. When you start up the routed port, another internal VLAN
number is assigned to it.
Switch> show vlan internal usage
VLAN Usage
---- -------------
1025 FastEthernet0/23
1026 FastEthernet0/24
Related Commands Command Description
private-vlan Configures a VLAN as a community, isolated, or primary VLAN or
associates a primary VLAN with secondary VLANs.
switchport mode Configures the VLAN membership mode of a port.
vlan Enables VLAN configuration mode where you can configure VLANs 1 to
4094.