Specifications

2-528
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show vlan
show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
show vlan [access-map | brief | dot1q tag native | filter | id vlan-id | internal usage | mtu | name
vlan-name | private-vlan [type] | remote-span | summary | uni-vlan [type]] [
| {begin |
exclude | include} expression]
Syntax Description
Note Though visible in the command-line help string, the ifindex keyword is not supported.
access-map See the show vlan access-map command.
brief (Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
dot1q tag native (Optional) Display the IEEE 802.1Q native VLAN tagging status. This
keyword is supported only when the switch is running the metro IP access or
metro access image.
filter See the show vlan filter command.
id vlan-id (Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
internal usage (Optional) Display a list of VLANs being used internally by the switch.
These VLANs are always from the extended range (VLAN IDs 1006 to
4094). You cannot create VLANs with these IDS by using the vlan global
configuration command until you remove them from internal use. This
keyword is supported only when the switch is running the metro IP access
image.
mtu (Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
name vlan-name (Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
private-vlan [type] (Optional) Display information about configured private VLANs, including
primary and secondary VLAN IDs, type (community, isolated, or primary)
and ports belonging to the private VLAN. Enter type (optional) to see only
the VLAN ID and the type of private VLAN.
remote-span (Optional) Display information about Remote SPAN (RSPAN) VLANs.
summary (Optional) Display VLAN summary information.
uni-vlan [type] (Optional) Display user network interface-enhanced network interface
(UNI-ENI) VLAN information. Enter type (optional) to see only the VLAN
ID and type of UNI-ENI VLAN.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.