Specifications

2-487
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show mvr interface
Examples This is an example of output from the show mvr interface command:
Switch# show mvr interface
Port Type Mode VLAN Status Immediate Leave
---- ---- ---- ---- ------- ---------------
Fa0/1 Receiver Trunk 1 ACTIVE/UP DISABLED
Fa0/1 Receiver Trunk 2000 ACTIVE/DOWN DISABLED
Fa0/2 Receiver Trunk 2 ACTIVE/UP DISABLED
Fa0/2 Receiver Trunk 3000 ACTIVE/UP DISABLED
Fa0/3 Receiver Trunk 2 ACTIVE/UP DISABLED
Fa0/3 Receiver Trunk 3000 ACTIVE/UP DISABLED
Fa0/10 Source Access 10 ACTIVE/UP DISABLED
In the preceding display, Status is defined as follows:
• Active means the port is part of a VLAN.
• Up/Down means that the port is forwarding/nonforwarding.
• Inactive means that the port is not yet part of any VLAN.
This is an example of output from the show mvr interface fastethernet0/10 command:
switch# show mvr interface fa0/10
Port Type Mode VLAN Status Immediate Leave
---- ---- ---- ---- ------- ---------------
Fa0/10 RECEIVER Trunk 201 ACTIVE/DOWN DISABLED
This is an example of output from the show mvr interface fastethernet0/1 command. In this example,
the port is not an MVR member:
switch# show mvr interface fa0/1
Port Type Mode VLAN Status Immediate Leave
---- ---- ---- ---- ------- ---------------
Fa0/1 NON MVR Access 0 INACTIVE DISABLED
This is an example of output from the show mvr interface gigabitethernet0/1 members command:
Switch# show mvr interface gigabitethernet0/1 members
239.255.0.0 vlan 202 DYNAMIC ACTIVE
239.255.0.1 vlan 202 DYNAMIC ACTIVE
239.255.0.2 vlan 202 DYNAMIC ACTIVE
239.255.0.3 vlan 203 DYNAMIC ACTIVE
239.255.0.4 vlan 203 DYNAMIC ACTIVE
239.255.0.5 vlan 203 DYNAMIC ACTIVE
Related Commands Command Description
mvr (global configuration) Enables and configures multicast VLAN registration on the
switch.
mvr (interface configuration) Configures MVR ports.
show mvr Displays the global MVR configuration on the switch.
show mvr members Displays all receiver ports that are members of an MVR
multicast group.