Specifications

2-483
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show monitor
Examples This is an example of output for the show monitor user EXEC command:
Switch# show monitor
Session 1
---------
Type :Local Session
Source Ports:
RX Only: Fa0/24
TX Only: None
Both: Fa0/1-2,Fa0/1-5
Destination Ports:Fa0/18
Encapsulation:Replicate
Session 2
---------
Type :Remote Source Session
Source Ports:
Source VLANs:
TX Only: 10
Both: 1-9
Dest RSPAN VLAN: 105
This is an example of output for the show monitor user EXEC command for RSPAN source session 1:
Switch# show monitor session 1
Session 1
---------
Type :Local Session
Source Ports:
RX Only: Fa0/24
TX Only: None
Both: Fa0/1-2,Fa0/1-5
Destination Ports:Fa0/18
Encapsulation:Replicate
This is an example of output for the show monitor session all user EXEC command when ingress traffic
forwarding is enabled:
Switch# show monitor session all
Session 1
---------
Type :Local Session
Source Ports :
Both :Fa0/2
Destination Ports :Fa0/3
Encapsulation :Replicate
Ingress:Enabled, default VLAN = 5
Ingress encapsulation:DOT1Q
Session 2
---------
Type :Local Session
Source Ports :
Both :Fa0/1
Destination Ports :Fa0/4
Encapsulation :Replicate
Ingress:Enabled
Ingress encapsulation:DOT1Q
Related Commands Command Description
monitor session Starts or modifies a SPAN or RSPAN session.