Specifications

2-452
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show lacp
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags: S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 3 neighbors
Partner’s information:
Partner Partner Partner
Port System ID Port Number Age Flags
Gi0/1 32768,0007.eb49.5e80 0xC 19s SP
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x3 0x3C
Partner’s information:
Partner Partner Partner
Port System ID Port Number Age Flags
Gi0/2 32768,0007.eb49.5e80 0xD 15s SP
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x3 0x3C
Admin Key Administrative key assigned to this port. LACP automatically generates an
administrative key value as a hexadecimal number. The administrative key defines the
ability of a port to aggregate with other ports. A port’s ability to aggregate with other
ports is determined by the port physical characteristics (for example, data rate and
duplex capability) and configuration restrictions that you establish.
Oper Key Runtime operational key that is being used by this port. LACP automatically generates
this value as a hexadecimal number.
Port Number Port number.
Port State State variables for the port, encoded as individual bits within a single octet with these
meanings:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired
Note In the above list, bit7 is the MSB and bit0 is the LSB.
Table 2-17 show lacp internal Field Descriptions (continued)
Field Description