Specifications

2-446
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show ipv6 route updated
show ipv6 route updated
Use the show ipv6 route updated user EXEC command to display the current contents of the IPv6
routing table.
show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |
day{month [hh:mm]}] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Use the show ipv6 route privileged EXEC command to display the current contents of the IPv6 routing
table.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
protocol (Optional) Display routes for the specified routing protocol. You can enter
any of these keywords:
• eigrp
• ospf
• rip
or display routes for the specified type of route. You can enter any of these
keywords:
• connected
• local
• static
• interface interface id
boot-up Display the current contents of the IPv6 routing table.
hh:mm Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the
colons (:). For example, enter 13:32
day Enter the day of the month. The range is from 1 to 31.
month Enter the month in upper case or lower case letters. You can enter the full
name of the month, such as January or august, or the first three letters of the
month, such as jan or Aug.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(50)SE This command was introduced.