Specifications

2-397
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show idprom
show idprom
Use the show idprom user EXEC command to display the IDPROM information for a Gigabit Ethernet
interface.
show idprom {interface interface-id} [detail] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines This command applies only to Gigabit Ethernet interfaces and displays information about SFPs inserted
in the SFP module slot.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show idprom interface command for a Gigabit Ethernet interface:
Switch# show idprom interface gigabitethernet0/1
General SFP Information
-----------------------------------------------
Identifier : 0x03
Connector : 0x07
Transceiver : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Encoding : 0x02
BR_Nominal : 0x01
Vendor Name : CISCO-NEC
Vendor Part Number : OD-BP1511-23SL2
Vendor Revision : 0x30 0x30 0x30 0x31
Vendor Serial Number : NEC08440067
-----------------------------------------------
Other Information
-------------------------------------------------------
Port asic num : 0
Port asic port num : 0
XCVR init completed : 1
interface interface-id Display the IDPROM information for the specified Gigabit Ethernet
interface.
detail (Optional) Display detailed IDPROM information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.