Specifications

2-393
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show ethernet service interface
show ethernet service interface
Use the show ethernet service interface privileged EXEC command to display interface-based
information about Ethernet customer-service instances for all interfaces or a specified interface.
show ethernet service interface [interface-id] [detail] [ | {begin | exclude | include} expression]
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples These are examples of outputs from the show ethernet service interface commands:
Switch# show ethernet service interface gigabitethernet0/1
Interface Identifier
GigabitEthernet0/1 PE2-G101
Switch# show ethernet service interface detail
Interface: FastEthernet0/1
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/2
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
Interface: FastEthernet0/3
ID:
CE-VLANS:
EVC Map Type: Bundling-Multiplexing
<output truncated>
interface-id (Optional) Display service-instance information for the specified interface.
detail (Optional) Display detailed information about service instances on all
interfaces or the specified interface.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SEG This command was introduced.