Specifications

2-389
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show ethernet service evc
show ethernet service evc
Use the show ethernet service evc privileged EXEC command to display information about Ethernet
virtual connection (EVC) customer-service instances.
show ethernet service evc [id evc-id | interface interface-id] [detail] [ | {begin | exclude | include}
expression]
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show ethernet service evc command:
Switch# show ethernet service evc
Identifier Type Act-UNI-cnt Status
BLUE P-P 2 Active
PINK MP-MP 2 PartiallyActive
PURPLE P-P 2 Active
BROWN MP-MP 2 Active
GREEN P-P 3 Active
YELLOW MP-MP 2 PartiallyActive
BANANAS P-P 0 InActive
TEST2 P-P 0 NotDefined
ORANGE P-P 2 Active
TEAL P-P 0 InActive
id evc-id (Optional) Display EVC information for the specified service. The EVC
identifier can be a string of from 1 to 100 characters.
interface interface-id (Optional) Display EVC information for the specified interface.
detail (Optional) Display detailed information about EVC service or the specified
EVC ID or interface.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SEG This command was introduced.